| Age | Commit message (Collapse) | Author |
|---|
|
tcc (which stands for 'tildecoin check'), simply adds all the balances and prints the sum. This can be used to check that the amounts sent and amounts received are equal.
|
|
|
|
Benjamin Harris (https://ben.tild3.org, https://github.com/benharri, and https://benharr.is) found a bug where the time recorded for transaction logs/messages was local server time instead of UTC. It should have been UTC no matter what the local time was.
|
|
To fix the preprocessor constants so that they point to the right directory for the tcoin and pcoin executables. This will be different depending on where the tcoin and pcoin executables are stored.
|
|
Previously, the executables 'tcoin' and 'pcoin', which had setuid set, were stored in tcoin/bin/*. However, the "tcoin" directory is restricted, so any executables inside it are inaccessible to users.
To fix this, the compile_tcoin and compile_pcoin scripts have been modified to store the executables in a third specified directory, called the <bin dir> in the help. <bin dir> will be accessible to all users. The symbolic constants/preprocessor directives have also been changed to reflect the updated paths.
|
|
Previously, the executables 'tcoin' and 'pcoin', which had setuid set, were stored in tcoin/bin/*. However, the "tcoin" directory is restricted, so any executables inside it are inaccessible to users.
To fix this, the compile_tcoin and compile_pcoin scripts have been modified to store the executables in a third specified directory, called the <bin dir> in the help. <bin dir> will be accessible to all users. The symbolic constants/preprocessor directives have also been changed to reflect the updated paths.
|
|
A default message is now shown when there are no messages to show.
|
|
Since not all places where tcoin runs have tildebot, minerbot and daily-adventure, these integrations are now disabled in the code through preprocessor directives (symbolic constants that act as flags)
|
|
pcoin.cpp and tcoin.cpp were missing the preprocessor directives generated by ntcoin. The right preprocessor directives are now included in both files.
|
|
I had missed two symbolic constants that are present in pcoin.cpp but not tcoin.cpp. Those two have been added now.
|
|
1. Single quotes closed before command substitutions, and opened again right after them. (Some cases were missed previously.)
2. The u+s mode/permission is used on all subdirectories of the tcoin directory and the tcoin directory itself now, so that files created are owned by the owner of the containing directory by default. This will prevent the class of bugs that would arise when files are created through the tcoin executable (which has the setuid bit set).
3. A mistake in the file name and location of the base amount (tcoin/base/base.txt) was corrected.
|
|
directories
This option was added to allow the #define configuration to be reprinted even if ntcoin was already used to recreate tcoin's subdirectory structure.
|
|
integrations
Defining the symbolic constants NO_KROWBAR, NO_DA and NO_MINERCOIN disables the three coin integrations during compile time.
|
|
|
|
Uses "realpath" to get rid of all trailing slashes and check that each directory in the path supplied exist (other than the innermost directory).
|
|
tcoin and pcoin
1. Sets up all relevant directories, scripts and binaries for tcoin and pcoin, assuming the current directory is right inside the GitHub repo (same depth as the LICENSE file).
2. Creates soft-links to the executables in "bin" folder inside the "tcoin" folder in the "~/bin" folder.
3. Prints the relevant preprocessor directives to be put in tcoin.cpp and pcoin.cpp (without actually putting it in those two files).
Because of 3. above, the tcoin.cpp and pcoin.cpp files will have to be modified again, after which "compile_tcoin" and "compile_pcoin" can be called again to update the binaries.
|
|
npcoin gets new pcoin accounts ready. The relevant paths were hardcoded earlier, but now assume the "tcoin" directory is in the current directory.
|
|
Updating the successful login message to add additional information about running `tcoin` to check one's balance and messages. This is intended to make it easy for new users to know what to do once they've done "tcoin on".
|
|
When there are fewer than <n> messages in total, and one runs "tcoin -m <n>", an extra newline was shown between "Last <n> messages:" and the actual messages. This commit fixes that by checking if the first character in the actual messages is a newline and putting one more newline only if it isn't (instead of always).
|
|
pcoin.cpp had redundant code in 'int main()', where user_amount was redeclared (and thus became a local variable that shadowed the global version inside 'int main()' (!). Fixed by removing the redeclared, redundant line.
|
|
Fixed bug in "tcoin init" and "tcoin" when an uninitialised user runs them. Previously, it used to display the following error: Error! Could not open file at <file_path>! Assuming its internal content is "0\n" because 'user_amount' in 'int main()' was read from the file before checking if the user had initialised.
|
|
Added #define DEBUG and put a few check statements under it.
Fixed error message in pcoin that suggested the incorrect "add_internal_balance" amount when "internal_balance" owed to a particular user was not enough (and was lesser than the number of tildecoins being sent using the "send" command to said user). Also, fixed an error in retrieving the amount owed to a particular user when doing checks during the "send" command ("temp_program_sender_username" instead of "program_sender_username").
|
|
credit to eigenellies/diodelasses and npa
|
|
daily-adventure changed how it stores state, so this new code fixes daily-adventure integration to the new format that daily-adventure stores state in.
|
|
daily-adventure changed how it stores state, so this new code fixes daily-adventure integration to the new format that daily-adventure stores state in.
|
|
bash script creates directory structure for new program accounts
|
|
|
|
|
|
|
|
|
|
|
